The physical and analytical chemical characteristics of the aluminum bronze sheet itself, management and decision-making of the expected effect of the aluminum bronze sheet’s moisture-proof and seismic grade For the expected effect of anti-rust treatment of anti-seismic grade, the aluminum bronze sheet will be designed to be raised tightly.
During installation, it will be evenly covered with plastic deformation and tightly occluded with cement concrete. Then in the case of uneven concrete cracks on the ground, the tightness will be slowly pulled to ensure the expected effect of the anti-rust treatment of the building’s seismic grade.
Therefore, aluminum bronze plate is suitable for basic moisture-proof, dam body waterproof, dam moisture-proof, aisle moisture-proof, as well as moisture-proof of holes in the dam foundation, moisture-proof of workshops, and waterproof of transverse joints under overflow surface of various advanced water conservancy and hydropower engineering buildings. It is an ideal product for preventing carelessness and building earthquake-resistant grades against collapse.
All copper will react with oxygen. Under certain standards, the Cu2O caused by anodizing treatment can form a specific protective film on the copper surface, and the Cu2O on the surface is partially oxidized to CuO under the action of dissolved oxygen in water. Therefore, the hydroxide protective film on the copper surface has a two-layer structure, the inner layer is Cu2O, and the surface is composed of Cu2O and CuO. However, Cu2O and CuO cannot be reflected in the case of acid and alkali, so this is equivalent to adding a layer of protective film to copper, so the aluminum bronze plate has strong corrosion resistance.
Since the density of pure copper is 8.9g/cm3, it has high electrical conductivity, low tensile strength and low compressive strength, so the aluminum bronze plate has high tensile strength and excellent plastic deformation. Therefore, aluminum bronze plate is used in new projects such as river embankment moisture-proof, tunnel construction moisture-proof, power station moisture-proof, etc. It is not easy to cause cracking when uneven concrete cracks are caused on the floor, so as to improve the professional ability of building earthquake resistance and anti-corrosion of water conservancy and hydropower engineering buildings. impact force, in addition to anti-collapse.
Post time: Nov-07-2022