Expert knowledge on storage methods of copper rods

Expert knowledge on storage methods of copper rods

1. We have to set up the warehouse. The temperature of placing the copper is 15 to 35 degrees in the middle. The oxygen-free copper rod and metal wire drawing copper plate must bypass the water source. What is the storage method of the copper rod? The relative humidity of the air is slightly lower than the normal humidity. . If the water vapor is too concentrated, such as the rainy season in coastal areas, you can add some moisture-proof desiccant to keep the air circulation of the warehouse.
2. In the warehouse, all kinds of compounds with high pH and tensile strength should bypass the copper pipe. The acid raw material and the alkali raw material will cause a chemical reaction between the vapor and the copper later, which is very bad for the copper rod itself.
3. Once the oxygen-free red copper rod is found to be rusted on the surface of the copper tube, it can be wiped off with hemp yarn copper core wire, brushed metal red copper plate or with sea pure cotton cloth without water. Wipe off with cooking oil or lubricant
4. In the warehouse, copper rods with cracks or serious corrosion are found. Everyone try to place them separately. The higher the height, the better, to reduce the dry humidity of the vapor. There is no need to mix and place it with other copper rods to prevent them from affecting each other. The oxygen-free copper rods and metal wire drawing copper plates cause chemical reactions.
5. Different specifications and models, how is the storage method of copper rods? The copper of different production batches, because the composition of pure copper is not necessarily the same, it is recommended to separate and store them. If there are specifications, store them in separate warehouses. The surface of the copper rod is likely to have the acidity and alkalinity of the solution, so it is necessary to bypass the raw materials such as rubber materials for storage.
Safe storage of copper rods can improve the application period of copper rods and ensure its performance parameters, which can avoid many unnecessary hazards.