-
C17000 Beryllium Copper Composition Physical Properties Main Uses
Introduction of C17000 Beryllium copper: C17000 beryllium copper has good cold drawing properties and excellent heat treatment performance. C17000 beryllium copper key as pulse damper, diaphragm, metal bellows, torsion spring. Element: Copper + required element Cu: ≥99.50 Nickel+Cobalt Ni+Co: ≤0....Read more -
Effect of Cerium on Properties of Tin Phosphor Bronze Alloy
Experiments have proved the influence of cerium on the microstructure of the tin-phosphor bronze QSn7-0.2 alloy that has been cast, homogenized and recrystallized. The mesh becomes finer, and the grain structure is obviously refined after deformation annealing. Adding a small amount of rare earth...Read more -
Introduction to the use of phosphor bronze plate
Uses of Phosphor Bronze Plates: bronze (phosphor bronze) (tin bronze) (phosphor tin bronze) is added from bronze with degassing agent phosphorus P content of 0.03~0.35%, tin content of 5~8%. And other trace elements like iron Fe , Zinc Zn and other compositions have good ductility and fatigue res...Read more -
What is the density of tin bronze?
Tin bronze density specific gravity ρ (8.82). Bronze can be divided into two categories: tin bronze and special bronze (ie Wuxi bronze). For casting products, add the word “Z” before the code, such as: Qal7 means that the aluminum content is 5%, and the rest is copper. Copper casting ...Read more -
The difference between lead tin bronze and tin bronze
Differences between lead-tin bronze and tin bronze Phosphor bronze. Tin phosphor bronze has higher corrosion resistance, wear resistance, no sparks when punching out. It is used for bearings at medium speeds and heavy loads, and the working temperature is 250 ° C. It has self-aligning and no defl...Read more -
The difference between aluminum bronze and beryllium copper
Beryllium copper, also known as beryllium bronze, is the “king of ductility” in alloy copper. After solid solution aging quenching and tempering treatment, a commodity high toughness forged beryllium bronze aluminum alloy with high toughness and high electrical conductivity can be obt...Read more -
Application of Copper in Light Industry
Because copper products have good comprehensive properties, it can be seen everywhere. Air conditioners and refrigerators The temperature control of air conditioners and refrigerators is mainly achieved through the evaporation and condensation of heat exchanger copper tubes. The size and heat tra...Read more -
How to deal with the deformation of products processed by beryllium bronze
A spring made of beryllium bronze can be compressed hundreds of millions of times. Copper is much softer than steel, and less resilient and less capable of resisting the fall. After adding some beryllium to copper, the hardness is enhanced, the elasticity is excellent, the loss resistance is very...Read more -
What are the characteristics of copper and copper alloys
Bronze originally refers to copper alloys with tin as the main additive element. In modern times, all copper alloys except brass are included in the category of bronze, such as tin bronze, aluminum bronze, and beryllium bronze. It is also customary to divide bronze into two categories: tin bronze...Read more -
Characteristics of common copper alloys
The most commonly used copper and its alloys are: pure copper, brass, bronze, etc. The appearance of pure copper is red-yellow. In the air, the surface will form a purple-red dense film due to oxidation, so it is also called red copper. The electrical conductivity and thermal conductivity of pure...Read more -
Alloying of copper
Liquid state is an intermediate state between solid state and gaseous state. Solid metals are composed of many grains, gaseous metals are composed of single atoms that resemble elastic spheres, and liquid metals are composed of many groups of atoms. 1. Structural characteristics of liquid metals ...Read more -
Uses of brass rods and copper rods
Uses of Brass Rods 1. It can be used for all kinds of deep-drawing and bending parts, such as pins, rivets, washers, nuts, conduits, barometers, screens, radiator parts, etc. 2. It has excellent machine function, excellent plasticity in hot state, acceptable plasticity in cold state, good machina...Read more
