Phosphor bronze rod anti-corrosion solution

As a raw material made of copper, phosphor bronze rod itself is not easy to rust, but in the process of use, you can always see some rust-like components. For the anti-corrosion treatment of phosphor bronze rods, we can start from several aspects:
After the phosphor bronze rod welding is completed, the welding machine generally takes about 5 minutes to lift up. This few minutes is especially critical for the antirust treatment of the phosphor bronze rod. You can wipe the connection part with a wet towel. The advantage of this is that it can not only improve the stability of the welding position, but also remove the slag on the welding surface to prevent corrosion. When there are regulations, blowing the inner wall of the phosphor bronze rod with an inert gas to keep it dry is also a reasonable way to avoid rust.
Secondly, oxidation resistance treatment can be carried out on the welding place of phosphor bronze rod. The copper in the phosphor bronze rod and the water and oxygen in the air are prone to chemical reactions. There is no oxidation resistance treatment. Once exposed to the air for a long time, especially in humid air, rust is inevitable. If in order to prevent rust well, it can be sprayed with copper corrosion-resistant paint. This material is very similar to paint, but it is not paint. It adheres to the surface of the phosphor bronze rod and is a very good oxidation resistance maintenance for the phosphor bronze rod.
When the surface of the phosphor bronze rods is corroded, we need to place the rusted phosphor bronze rods in different categories without putting them together with other non-rusted ones. We must pay close attention to the detection of the gas moisture content in the storage place. For some rust on the surface, we can simply use a towel to clean it, and wipe it off gently. If the rust covers a large area, we should clean the phosphor bronze rod first to remove dirt or scale, and then wipe it with copper anti-corrosion spray paint.
The rust of phosphor bronze rods is a chemical substance after copper oxidation. After welding, it is necessary to carry out targeted maintenance on phosphor bronze rods.